Maintenance Procedure Recommended For ESDWork Conductive Tiles / Static Dissipative Tiles

1.) Daily and Weekly Maintenance

a) Sweep and/or dust mop the entire floor.
b) Wet or damp mop soiled areas with neutral pure water.
c) If there is any scuffed and heel mark on the floor, simply remove it with spray buff.

2.) Monthly Maintenance
a) Sweep and/or dust mop the entire floor.
b) Wet or damp mop soiled areas with a neutral cleaner.
c) Rinse the floor completely.
d) If there is any scuffed and heel mark on the floor, simply remove it with spray buff.
e) Dry buff the entire floor (Make sure Not to apply the Normal Wax).

3) Yearly Maintenance

a) Sweep and/or dust mop the entire floor.
b) Strip the entire floor with a stripping solution.
c) Rinse the entire floor completely.
d) If there is any scuffed and heel mark on the floor, simply remove it with spray buff.
e) Dry buff the entire floor (Make sure Not to apply the Normal wax).

4.) Avoid exposure of tile to excessive heat, such as direct sun light.